Fitment Information
- Mitsubishi Evolution VII
- Mitsubishi Evolution VIII
- Mitsubishi Evolution IX
Specifications
- Anodized Aluminum Mounting Plate
- Venturi Jet Pump with Pressure Relief Valve
- 8AN Male and OEM Compatible Pump Outlet Fittings
- 6AN Male and OEM Compatible FPR Inlet Fittings
- Anodized Aluminum Dual Pump and Fuel Sensor Bracket
- Electrical Hardware for Fuel Pumps and OEM Sender
- Fluorosilicone Duckbill Return Valve
- Submersible Fuel Lines
- Stainless Steel Hardware and Clamps
- New Anti-rotation Electrical Terminals
This system is ONLY compatible with the following pumps:
-
20-1340
- AEM 50-1220 (or other pumps with exact same form factor)
- DW440
-
20-1342
- Walbro F90000267
- Walbro F90000274
- Walbro F90000285
- a.k.a. “Walbro 450”
NOTE: These kits eliminate the OEM hanger’s “post” fuel pump filter. A low micron aftermarket fuel filter should be installed downstream to protect the injectors from debris. NOTE: the optional fuel hanger plumbing kits listed below include this necessary post pump filter.
What’s Included?
- Fuel Filter (-03 Stainless or -05 Microglass)
- Black 8AN Male Adapter Fittings (x2)
- Billet Aluminum 60mm Filter 2-Piece Clamp
- Aluminum EVO 7-8-9 Filter Bracket
- 8AN PTFE Fuel Feed Hose Replacement (x2)
- 6AN PTFE Fuel Return Replacement
- EFI Fuel Hose, 6AN ORB Fitting, and EFI Clamp
- Inverted Flare to 6AN Adapter Fitting
- Stainless Steel Hardware
Product Description
The plumbing kits include everything required to connect directly to an aftermarket (-8AN male) fuel rail and (-6AN male) FPR for both single and dual pump configurations. This includes a pre-made PTFE -8AN feed line from the hanger up to the engine bay and the kit re-uses the factory feed line as the regulator return line.
PTFE -8AN hoses attach to a Radium Engineering fuel filter that mounts underneath the vehicle using a specifically designed EVO 7-8-9 bolt-on bracket.
