Specs & Features
- Can be tied directly into P3 Multi-Gauge using analog input
- Uses Bosch LSU 4.9 sensor
- Patented DirectDigital™ Wideband Technology
- Wideband O² Compatible with ALL fuel types
- Ability to calibrate O² sensor for maximum accuracy
- Integrated dual-color status LED (Green/Red)
- *2-Configurable linear 0-5v analog outputs
- 8ft sensor cable
- Positive lock connectors for all connections
- Innovate MTS serial in/out
- Serial connection to your PC
- Real-time display data on screen and/or with powerful LogWorks software
*Two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs.
DEFAULT OUTPUT CONFIGURATION
- Analog Output 1- (Yellow wire) 0 volt = 7.35 AFR (.5 Lambda) 5 volts = 22.39 AFR (1.52 Lambda)
- Analog Output 2- (Brown wire) 1.1 volt = 14 AFR .1 volt = 15 AFR
- With the provided LM Programmer software these analog outputs may also be configured by the user.
- *Program Cable (Only needed for Datalogging and to change the Fuel Type Setting), Manual. Innovate LC-2 User’s Instruction Manual
SPECIFICATIONS
- Power
- Operating Voltage: 9.8V to 16V DC
- Input Current, O² heater initial warm-up: 2.0A nominal, 3A max
- Input Current, O² normal operation: 0.8A nominal, 1.1A max
- Environmental
- Operating ambient temperature: 0° to 140° F (−17.78° to 60° C)
- Storage ambient temperature: −40° to 185° F (−40° to 85° C)
- Water resistance Splash resistant, non-submersible
- Sensors
- Compatible Types: Bosch™ LSU4.2 & Bosch™ LSU4.9
- Bosch™ Heater Control: Digital PID via pump-cell impedance
- Measurements
- Lambda: .5 to 1.52
- Air/Fuel Ratio: 7.35 to 22.39
- Accuracy
- For Lambda: Accurate to +/- .007 (.1 AFR)
- Response Time
- Free Air to Lambda: < 100 mS ( < 25 mS typical)
- Inputs
- Serial: 1- Innovate MTS Compatible
- Outputs
- Analog: 2- 0-5VDC, 10 bit resolution, programmable
- Serial: 1- Innovate MTS Compatible
- Communication
- Serial: MTS (Innovate Modular Tuning System) compatible
Product Description
Monitor your vehicle’s Air/Fuel Ratio effortlessly with the Innovate Motorsports LC-2 wideband kit. Designed for vehicles without a factory wideband, this kit provides all the necessary components to conveniently read AFR directly on your Multi-Gauge. Say goodbye to interior clutter while keeping a close watch on your AFR.
Featuring advanced 100% digital wideband air/fuel ratio technology, the LC-2 utilizes the renowned DirectDigital™ signal processing technology to accurately display the engine’s richness or leanness at any load. Its self-calibrating circuitry automatically adjusts for variations in temperature, altitude, and sensor condition. With a digital input/output and two fully programmable analog outputs, the LC-2 is perfect for applications such as dynamometers, data acquisition systems, standalone ECUs, and gauges. Upgrade your monitoring capabilities with the Innovate Motorsports LC-2 wideband kit and ensure optimal engine performance.
Manufacturer Warranty
P3 Sensor products carry a 1 year limited warranty for failures or defects. Warranty does not cover damage caused during installation and does not cover installation charges. Warranty period starts once the product is delivered to the shipping address listed on order.
Redline360 sells only genuine and authentic P3 Gauges products.
