With these shims you can correct both rear camber and rear toe on newer Volkswagens and Audis. By combining the shims (two may be used on each wheel) you can get up to +/- 1.0 camber change and up to +.50 degree toe change. Our wrench (87530) is a must when installing these shims. It allows you to remove the brake tone ring, bearing, seal and hub assembly as one unit.
CAMBER
Part No. / Change
71530 / +.50 degree
71531 / +1.00 degree
71532 / -.50 degree
71533 / -1.00 degree
Recommended Tools: 87530 – VW Shim Wrench
Rear Adjustment range: Camber +/- .50 degree to +/- 1.00 degree
Installation time: .5 hr/side
Required: 1 shim per wheel/ per angle changed
NOTE: When installing these shims it is recommended that you use our VW Shim Wrench (P/N 87530) to assist in removing the rear hub.
CAMBER
Part No. / Change
71530 / +.50 degree
71531 / +1.00 degree
71532 / -.50 degree
71533 / -1.00 degree
Recommended Tools: 87530 – VW Shim Wrench
Rear Adjustment range: Camber +/- .50 degree to +/- 1.00 degree
Installation time: .5 hr/side
Required: 1 shim per wheel/ per angle changed
NOTE: When installing these shims it is recommended that you use our VW Shim Wrench (P/N 87530) to assist in removing the rear hub.
CAUTION: Check brake & rotor clearance for binding. 75970 spacers maybe required.
